DESCRIPTION

12V6A, 60W PD(Powered Device) Integrated Module (Isolation Type)

FEATURES

- Fully supports IEEE802.3af/at/bt

- Input Voltage Range 44V to 57V

- Short Circuit Protection

- Over-temperature Protection

- Programmable Classification (Default : Class 8)

- High Efficiency

- Easy Installation and Low Cost (Isolation Type, Minimum External Devices required)

- Low Output Ripple and Noise

- Adjustable Output Voltage

- 1500Vrms Isolation (Input-Output)

Pin #	Name	Description
1,2	VIN+	POE Direct Input +. This pin connects to the positive (+) output of the POE input bridge rectifiers.
3,4	VIN-	POE Direct Input -. This pin connects to the negative (-) output of the POE input bridge rectifiers.
5，6	NC	Do Not Connect.
7，8	-VDC	Negative DC Output. This pin provides the -VDC output.
9，10	+VDC	Positive DC Output. This pin provides the +VDC output.
11,12	NC	Do Not Connect.

PM1206B

Pin #	Name	Description
1	VA1	Input (1). This input pin connects to the centre tap of the transformer connected to pins 1&2 of the RJ45 connector. It is not polarity sensitive.
2	VA2	Input (2). This input pin connects to the centre tap of the transformer connected to pins 3&6 of the RJ45 connector. It is not polarity sensitive.
3	VB1	Direct Input (1). This input pin connects to pin 4&5 of the RJ45 connector(or centretap of 4&5). It is not polarity sensitive.
4	VB2	Direct Input (2). This input pin connects to pin 7&8 of the RJ45 connector(or centretap of 7&8). It is not polarity sensitive.
5，6	NC	Do Not Connect.
7，8	-VDC	Negative DC Output. This pin provides the -VDC output.
9，10	+VDC	Positive DC Output. This pin provides the +VDC output.
11,12	NC	Do Not Connect.

ELECTRICAL SPECIFICATIONSTypical System Diagram